Updating 3D model please wait...
- All Categories
- >
- Quick Connectors
- >
- Q Series Quick Connectors
- >
- Q Series Male Pipe Thread Body Connector Fittings
- >
- Q2BM-4N-S316
Q2BM-4N-S316 Q Series Male Pipe Thread Body Connector Fittings
Model: Q2BM-4N-S316
| Request Quote | Quantity |
Product Details
- Gauge Calibration
- Sampling System
- Portable Test Equipment
- Laboratory Equipment
- Gas Distribution
- Biopharmaceutical
- Easy to use.
- Minimum equipment shutdown.
- No tools required to make or break a connection.
- No probability of cross threading, galling, under or over-tightening.
- Interchangeable with same type of Swagelok, Parker, Hoke and TOMCO components.
- Single End Shut Off (SESO) - This Quick Connector style features body only shut off. Stem is open to atmosphere when disconnected.
- Double End Shut Off (DESO) - This Quick Connector style features both body and stem shut off at disconnection with a minimal amount of spillage and air inclusion.
- Use filters in front of quick connectors.
- Protect uncoupled body and stem with body and stem protectors or dust caps.
- Keep body and stem aligned when coupling and uncoupling.
- Couple and uncouple the quick connectors at room temperature.
- Couple and uncouple the quick connectors during system cleaning operations.
- Support hanging hoses or other equipment to prevent side load.
- Re-lubricate stem seal O-rings periodically.
| Documentation | |
| Quick-Connector-Ordering-Information.... | |
| Caution | Single-end quick connectors MUST be depressurized prior to disconnection. |
| Series | Q2 |
| Width Across Flat (H) (mm) | 19.10 |
| Diameter (D) (in) | 1.030 |
| Width Across Flat (H) (in) | 3/4 |
| Working Pressure (psig) | Up to 3000 |
| Working Pressure (bar) | Up to 206 |
| Connection Type | Male |
| Notes | Long Life Cycle. Dimensions shown with Hy-Lok nuts in finger-tight position, where applicable. All dimensions are in millimeters unless otherwise specified. Dimensions are for reference only, subject to change. |
| End Connection Size (in) | 1/4 ~ 1/2 |
| Length (L) (in) | 2.380 |
| Length (L) (mm) | 60.50 |
| Temperature Rating with FKM O-Ring (ºC) | -23 ~ 204 |
| Temperature Rating with FKM O-Ring (ºF) | -10 ~ 400 |
| O-Ring Material Options | NBR: -10 to 250 ºF (-23 to 121 ºC), FFKM: -10 to 600 ºF (-23 to 315 ºC), Neoprene: -40 to 250 ºF (-40 to 121 ºC), Ethylene Propylene: -50 to 300 ºF (-46 to 149 ºC) |
| Spillage (cm³) | 1.0 |
| Air Inclusion (cm³) | 1.0 |
| Maximum Water Flow Coefficient (Cv) Rate at 70 ºF (20 ºC) (gpm) | 6 |
| Maximum Water Flow Coefficient (Cv) Rate at 70 ºF (20 ºC) (L/min) | 22.7 |
| Pipe Size | 1/4-18 NPT |
| Diameter (D) (mm) | 26.20 |