General

Project Information

Select unit of measure for data and results

Select Rotary Actuation

*Select Operating Air Pressure

Application Loading

Select the feature that best represents your rotary application

*What is the total weight of part and tooling representing the circular load?

*What is the radius of the circular load?

Application Data

Select the mounting orientation of the rotary

*How far must the rotary table rotate for this application (ie; degree of rotation)?

*Indicate the actuation time needed for the rotary table to complete the move

sec

*How many cycles per hour are required?

c/h

Optional Additional Forces and Moment loading

What is the tension force that will be pulling on the rotary unit?

What is the compression force that will be pushing down on the rotary unit?

What is the moment load that will be acting on the rotary unit?

What additional torque from tooling or the part is applied to the rotary unit?

What additional inertia from tooling or part geometry must the rotary unit overcome?

Configuration

Is a pneumatic manifold required (air supply passed onto the rotary table)?

Specify metric or imperial mounting and air fittings

Rotary Selection

View linear list and select a specific model

Series	Image	Clean Room Rating	Max Payload (lb)	Max Inertia (in-lb-sec²)	Weight (lb)	Max Air Pressure (psi)	Min Air Pressure (psi)	End Stop Repeatability (deg)	End Stop Adjustability (deg)
Series	Image	Clean Room Rating	Max Payload (kg)	Max Inertia (N-m-s²)	Weight (kg)	Max Air Pressure (bar)	Min Air Pressure (bar)	End Stop Repeatability (deg)	End Stop Adjustability (deg)

Documentation

RESULTS

Application and Sizing Summary

General

Application Name
Customer Name
Application Location
Unit of Measure
Rotary Actuation	Pneumatic
Operating Air Pressure

Application Loading

Rotary Application Type	Centered Circular Load
Part and Tooling Weight
Radius (a) of circular load
Rotary Application Type	Centered Rectangular Load
Part and Tooling Weight
Length (a) of rectangular load
Width (b) of rectangular load
Rotary Application Type	Rectangular Load Off Center
Rectangular load short end weight
Rectangular load long end weight
Length (a) short end rectangular load
Length (b) long end rectangular load
Width (c) of rectangular load
Rotary Application Type	Point Load Off Center
Part and Tooling Weight
Radius (a) of the point load

Application Data

Mounting Orientation
Rotary Degree of Rotation
Actuation time for degree of rotation
Cycles per hour
Tension Force
Compression Force
Moment Load
Additional Torque
Additional Innertia

Configuration

Pneumatic Manifold Required
Mounting and Air Fittings

Selected Series

Documentation

Inertia
Acceleration
Velocity
Torque
Kinetic Energy
Energy Per Cycle
Energy Per Hour
Holding Torque

PNEUMATIC ROTARIES

General

Project Information

Application Loading

Application Data

Optional Additional Forces and Moment loading

Configuration

Rotary Selection

View linear list and select a specific model

Documentation

RESULTS

Product:

Attachments:

Application and Sizing Summary

General

Application Loading

Application Data

Configuration

Documentation